The garden building business is blooming booming!
Thanks to technological advances aiding mobile communications and the ever-increasing costs of commuting, many of us are opting to work from home. A self-contained office in the garden provides the perfect environment to do just that.
The downturn in the economy has also played its part in the garden building boom. Financial uncertainty has resulted in a reluctance to move house, with homeowners choosing to stay put and improve and/or extend properties. In some cases this has led to the introduction of a garden building, whether used as a garden room, summerhouse or kids’ den.
To get the maximum use from a garden building, heating (along with light and power) is a must. If the building isn’t warm and cosy, then it won’t be used, particularly in the colder winter months. This article looks at factors to consider when it comes to heating your garden building.
Insulation is key
Is there adequate insulation? Some, but not all purpose-built garden rooms, are adequately insulated. If you have converted a shed or outbuilding, or opted for a lower cost garden building, then you will probably need to add insulation. Without this, the cost of heating could be prohibitively expensive.
In order for any garden building to be comfortable and useable (for more than just storage), all year round, it will need to be heated.
So what factors should you consider when choosing heating for a garden building?
Heat output – when choosing any form of heating it is critical that the option you select has the capacity to adequately heat the space. If in doubt, oversize the heater, as you can always turn it down.
Thermostatic control – choosing a heating option with a thermostat will ensure that your garden building is heated optimally at a constant and comfortable temperature. Thermostatic controls provide efficient and cost- effective use of power; for instance, they can turn off a heater when the room has reached its optimum temperature; perfect on a sunny day for taking advantage of any “free heat” from the sun. By maintaining the temperature above a certain minimum level, you protect the contents of the building, including computers and soft furnishings, from cold or damp related damage.
Timer – by opting for a product with a timer, you can ensure that the heating is on when it needs to be. A timer allows you to set the heating to come on just before you start your day, ensuring a toasty office in time for when you arrive.
Space – by their very nature, many outbuildings are small in size. Therefore space is often a critical factor in choosing your heating option. These days, radiators are available in unusually narrow or low sizes, so there is likely to be something to accommodate even the most awkward of wall spaces. There are also floor-standing heaters, which are portable and take up no wall space.
Budget – it may seem obvious, but costs vary immensely on heating options for garden buildings. For instance, the price of an electric heater can range from £20 for a basic fan heater to £2000 for the ultimate designer model. Take account of installation costs as well, for example if you opt for electric underfloor heating, bear in mind that installation costs may be considerable, especially if the floor needs to be taken up to allow the electric foil mat to be fitted underneath.
Aesthetics – Whether your new space is for living or working, as well as wanting a comfortable and functional environment, you may also want to add style with an attractive looking heater; the many designs now available mean you can choose minimalism to aid focus, bright colours for inspiration or soft curves to give a relaxed feel.
So what are the different heating options available for garden buildings?
Water and oil filled electric radiators
The water inside a water-filled electric radiator is heated by an electric element and is used as a heat reservoir. Oil-filled electric radiators are heated electrically; the oil is not burnt but again is used as a heat reservoir. Both types of electric radiators work on the same principle and have similar running costs.
Wall mounted and floor standing models available;
Many floor mounted versions can be plugged into a socket, so there are no installation costs and the radiators are often portable;
Wide range of contemporary and traditional styles available. From minimalist sleek designs like the Electric Royce (which is made of lightweight aluminium), to classic column style cast iron radiators like the Electric Etonian;
Many are available with timers and thermostats; and
Some styles heat up quickly (particularly those made of lightweight aluminium); others cool down slowly (such as those made of cast iron).
The wall-mounted versions don’t sit as close to the wall as some of the electric radiant panel radiators currently on the market.
Electric radiant panel radiators
Electric panel radiators radiate heat (rather than convecting it) and don’t contain any liquid. These radiators have become extremely popular in recent times, due to their efficient, environmental and practical qualities. One of the best electric panel radiators around is the iRad from Feature Radiators, which is beautifully designed, slim, flat and sits close to the wall.
Sits close to the wall;
Many sizes, finishes and colours available;
Heats up quickly;
Radiates warmth without “blowing”;
Warms both objects and the surrounding air;
Available with thermostats and timers; and
Precise, focused, highly efficient heating.
Almost always wall-mounted, so there will need to be at least some wall space available.
A wood-burning stove burns wood fuel and wood-derived biomass fuel whilst creating heat.
Lovely cosy feel with attractive real fire flame;
Carbon neutral, if fuel comes from sustainable sources;
Warms both objects and the surrounding air; and
Relatively low running costs.
Lack of controllability, which can lead to high temperatures;
Sourcing and moving around fuel can be difficult and messy;
Demands time and effort on a daily basis to keep it running;
Ash created needs to be cleaned up;
Requires reasonable amount of space, taking up both wall and floor space; and
Significant installation costs.
A fan heater works by passing air over a heating element, this heats up the air, which then leaves the heater, warming up the surrounding room.
Heats up aroomquickly;
Warms both objects and the surrounding air;
Relatively small so doesn’t take up much floor space; and
No installation costs.
As soon as its switched off, the room will cool down quickly;
Fan creates noise;
Uses a lot of energy resulting in high running costs; and
Heat is blown out rather than convected or radiated, which can create a stuffy and snoozy environment.
Infrared heating panels
Infrared heating panels are a relatively new idea in the UK but have been widely available in Europe for more than ten years. Infrared heaters heat through the use of infrared waves.
Focused heating, infrared waves only heat what they hit;
Provide heat rapidly;
Reasonably efficient to run;
Can be fitted onto the ceiling to keep them out of the way; and
Thermostats and timers available.
Only heat the objects that the infrared waves hit. If you sit facing an infrared heater, then the back of your body and head and any part below the heater will remain cold;
The surrounding air is not heated at all; and
Potential fire hazard – As this heating is focused and direct, there may be a risk of fire if the heater is placed too close to an object. For example, if an infrared heater fell onto a wood floor.
Electric underfloor heating
Electric underfloor heating consists of a foil heat mat containing heating wires, which warm the floor surface which in turn heats the air above it. The foil mat must be laid under the laminate or wooden flooring intended for the garden building.
No wall space required;
Nice feeling under foot;
When working to an optimum, whole room is evenly heated with an ambient background temperature;
Many are available with thermostats and timers; and
Relatively low running costs.
May not have sufficient capacity to provide adequate heat for building – depending on level of insulation, ceiling height, and amount of glass;
Relatively high installation costs;
Insulated floor required;
Must be installed under the floor, so may not be a desirable option where the flooring is already down;
Slow to respond, can take up to 3 hours to get up to temperature, so forward planning needed and can take a long time to cool down;
Limits choice of floor-coverings; and
If it fails, the cost and inconvenience of repair will be significant, as flooring may need to be removed or replaced.
Portable gas heaters
Historically, a popular option for heating rooms or outbuildings particularly where there was no power source. Power is provided to these heaters via gas bottles that sit at the bottom of the heater.
High heat output;
Self contained heaters, requiring no external power source;
No installation charges; and
Safety – you must not place items on top or directly in front of gas heaters. This may be a challenge if you are working in a small space;
Unpleasant gas odour;
Adequate ventilation is vital to prevent a build up of dangerous fumes;
Risk of carbon monoxide leak; and
Large bulky items taking up valuable space, both when in use and in storage.
Whatever type of garden room heating you choose, you must ensure that it has the capacity to heat the relevant space. It is important to maximize the power used to efficiently provide heat whilst minimizing energy wastage through the use of good insulation, timers and thermostats.
Bear in mind that these days having a comfortable warm outbuilding doesn’t mean you need to compromise on style with ugly, bulky and/or ineffective heating options. There is now a wide range of stylish, safe yet efficient electric heating solutions available.
For more information on finding the most suitable heating product for your garden building, speak to a radiator or heating expert.
Helena Gerwitz is the General Manager at Feature Radiators, the one-stop port of call for anyone wanting high performance, stylish heating at competitive prices. Our collection is made up of the best contemporary, designer, traditional cast iron and electric radiators and heated towel rails on the market in terms of quality, design and value for money. Whatever size the project, we are a firm favourite amongst architects, house builders and developers, heating engineers as well as home owners. With over 160 styles on display in our showroom, expert advice, unrivalled customer service and nationwide delivery, we are widely recognized as the UK’s leading radiator specialist.
Contemporary Designer Radiators Our exciting contemporary collection ranges from discreet minimalist styles and vertical radiators to dramatic wow-factor designer styles. Available in a myriad of colours and finishes including brushed and polished stainless steel radiators.
Cast Iron and Traditional Style Radiators Our cast iron radiators include wall and floor mounted versions in various styles. Our plain style Etonian cast iron radiators are widely regarded as the best of their type, whilst our Liberty cast iron radiators are the most popular ornate style.
Electric Radiators and Electric Central Heating Our stylish electric radiators have been selected based on their quality, design, heat output and value for money. We are constantly sourcing and developing new ranges to offer you a great choice of good looking stylish electric radiators!
Heated Towel Rails and Towel Radiators Our collection is made up of central heating, all electric and dual fuel heated towel rails, and bathroom radiators in traditional and contemporary styles with high heat outputs.
For more expert advice then contact Feature Radiators at http://www.featureradiators.co.uk, call them on 01274 567789 or visit them in person at Feature Radiators, Bingley Railway Station. BD16 2NB